The RO-Series
    Standard Features
  • 1st Stage - 5 micron sediment filter
  • 2nd Stage - 5 micron carbon block
  • 3rd Stage - 5 micron block
  • High capacity low pressure RO membrane
  • Wall mounted
  • Space saving design
  • Low maintence
  • Pressure gauges & shut off valves included
  • Saddle valve, Drain kit, plastic tubing included
*Available Sizes
     RO-50:       50 GPD
     RO-150:   150 GPD

*Output of all RO systems vary with water temperature, pressure and mineral content. Adding a pressure tank has the same effect as reducing the inlet pressure.
Complete Specifications & Installations

The R-13 Series
    Standard Features
  • Power coated steel frames
  • Inlet solenoid valve
  • Pre-filter
  • 1/2 HP Motor
  • Pre-filter & pump pressure gauges
  • Product water & drain water flow meters
  • Non-metallic membrane housing
  • Stainless Steel product water check valve
  • On/Off toggle switch
  • Low-pressure shut-off with auto restart
  • Feed water and product water TDS monitor
*Available Sizes
   R-13-0250:   250 GPD
   R-13-0600:   600 GPD
   R-13-1200:  1200 GPD

*Output of all RO systems vary with water temperature, pressure and mineral content.
Complete Specifications & Installations

    Applications
  • Computer Rooms
  • Clean Rooms
  • Electronic Fabrication
  • Laboratories
  • Museums
  • Hospitals & Clinics
  • Printing Plants


M-Series
Standard Features Optional Features   Operating Parameters
  • Stainless steel membrane vessels
  • 1:1 waste water recovery M450, 1000, 2400
  • 75% recovery M-4800,7200, 9600
  • UL 508 listing
  • Low energy TCF membranes
  • Stainless steel front panel
  • Panel mounted flow meters
  • Low pressure safety shut down
  • Built-in sediment and carbon pretreatment on systems up to 2400gpd
  • Powder coated frame
  • Low voltage electronics
  • Liquid filled pressure gauges
  • Tank pressure gauge
  • Performance tested and sanitized
  • Voltage options: 115V, 220V, 50/60Hz
  • Low inlet pressure alarm
  • Auto membrane flush at shut down
  • Auto bypass with audible alarm
  • 3-stage sediment, KDF, carbon
    pretreatment
  • Post treatment
  • Panel mounted TDS monitor
Available Sizes

          M-450: *450 gpd or .33 gpm
         M-1000: *1000 gpd or .69 gpm
         M-2400: *2400 gpd or 1.67 gpm
         M-4800: *4800 gpd or 3.33 gpm
         M-7200: *7200 gpd or 5.00 gpm
         M-9600: *9600 gpd or 6.67 gpm

      *Output of all RO systems vary with water temperature, pressure and mineral content. Adding a pressure tank has the same effect as reducing the inlet pressure.
 Operating pressure 150-180psig
 Rejection rate: 92-99%
 Feed water pressure: 25-80psig
 Water temperature: 40-100oF
 Maximum TDS: 5000 PPM
 pH: 2-11pH
 Iron: .1 mgl
 CaCo3: 10 grains